A: According to the use, it can be divided into three types:
(1) According to the pipe diameter, the pipe diameter is large and the air volume is large; Small diameter, high pressure;
( 2) According to the air volume, pressure and horse power;
(3) Consider the size of the space, noise, cost and other factors to make the final choice.
A:
High pressure ring blower and turbo blower.
A:
The characteristics of the ring blowers are high pressure, small air volume. When the cross-sectional area of the air outlet and inlet becomes smaller, the current of the motor will become larger (the maximum will exceed the load).
The characteristics of the turbo blowers are large air volume and low pressure. When the cross-sectional area of the air outlet and inlet becomes smaller, the current of the motor will become smaller.
A:
Ring blower: 1 / 6hp ~ 20HP
Turbo blower: 1 / 4HP ~ 25HP
A:
Sure. In addition to general motors, explosion-proof motors can also be used.
A:
The blower uses the operation of the motor to drive the impeller of the fan to rotate, so that the air between the blades in the impeller also rotates, and the air is transported out under the action of centrifugal force.
A:
The impeller of the blower has been checked for static and dynamic balance, with stable operation and minimal vibration.
No oil and gas generation, because the impeller is directly driven by the motor.
Safe operation and long service life.
A:
Printing machinery, dishwashing machinery, powder conveying, feeder, heat dissipation, ultrasonic cleaning, film machine, engineering site, automobile workplace, vacuum adsorption, vacuum handling, powder filling, fermentation tank, debris absorption, computer laser cutting machine, combustion machine, plastic machinery, food machinery, dust collector, woodworking machinery, dryer, incinerator, mechanical cooling, animal husbandry, swimming pools, SPA, etc.
A:
The air that can be inhaled by the general blower is 60 ° C, the air that can be inhaled by the extended heat insulation type is 60°C-250 ° C, and the temperature resistance of the motor can reach 155 ° C.
Ａ：
Yes, it needs special treatment.
A:
(1) The ambient temperature and humidity should meet the following conditions: single phase - 5 ~ 40 ℃, three-phase - 10 ~ 40 ℃;Humidity below 80%.
(2) Choose a place with good ventilation and less dust and moisture;
(3) For outdoor installation, please use a rain cover.
A:
Fixed to a horizontal and rigid base with screws. The weight of the base should be more than three times that of the blower. Pay special attention to whether the base is uneven, or install shock absorber to reduce noise.
A:
It can be installed in any direction. When the blower is installed vertically or obliquely, the motor surface shall be kept upward.
A:
1. The design of pipe diameter flow path should minimize the bending, and avoid the premature shrinkage of pipe diameter, which will cause inefficient pressurization of blower.
2. If the motor current is overloaded, please open the pressure relief valve or increase the air outlet.
3. For 24-hour users, it is recommended to install two motors alternately to prolong the service life of the motor.
4.If you have any installation issues, please contact our company.
Thank you for visiting our website. Your personal privacy is absolutely respected and protected by the website. To help you understand how the website collects, uses and protects your personal information, be sure to read the websitePrivacy Policy. Thank you!